ColorMaker Deso Dye
DESO dye concentrates are high-strength penetrating solutions of primary colors intended to make ready-to use dye stains by blending to the desired color and may be mixed with acetone and/or water. They can be used to create a range of affects from subtle earth tones to vibrant hues. Colors are sharp and translucent.
7039 HWY 276 Royce City, Texas 75189 Phone (972)289-1700 email: stevenv@decorativeconstructionsupply.com
APPLICATION
Contractors should first perfect their spraying and finishing techniques before coloring surface. Air movement, temperature, concrete type and finish will affect the amount of penetration and final result. For larger projects it may be necessary to do on-site mock-ups for the client. A cone nozzle spray tip produces the best results with a tip made from a metal composition (e.g. brass). Before starting determine a color plan with the appropriate dilutions and blends. Make a ready-to-use dye stain in the desired color by blending DESO dye with acetone and/or water. When mixing with acetone, spray a full wet coat at low air pressure and allow drying for 10 to 30 minutes before applying another coat, if desired. Drying time will vary depending upon the blending solution and the environment where product is being applied. If polishing floor, apply dye prior to final polishing pass. Once desired result is achieved, seal with one of COLORMAKER’S floor sealers, again using a sprayer. For maximum protection and superior durability, apply a topcoat of Uro Finish. In addition to water, acetone is the only other recommended mixer for dye stains since it is fast drying and water soluble.
Contractors should first perfect their spraying and finishing techniques before coloring surface. Air movement, temperature, concrete type and finish will affect the amount of penetration and final result. For larger projects it may be necessary to do on-site mock-ups for the client. A cone nozzle spray tip produces the best results with a tip made from a metal composition (e.g. brass). Before starting determine a color plan with the appropriate dilutions and blends. Make a ready-to-use dye stain in the desired color by blending DESO dye with acetone and/or water. When mixing with acetone, spray a full wet coat at low air pressure and allow drying for 10 to 30 minutes before applying another coat, if desired. Drying time will vary depending upon the blending solution and the environment where product is being applied. If polishing floor, apply dye prior to final polishing pass. Once desired result is achieved, seal with one of COLORMAKER’S floor sealers, again using a sprayer. For maximum protection and superior durability, apply a topcoat of Uro Finish. In addition to water, acetone is the only other recommended mixer for dye stains since it is fast drying and water soluble.
7039 HWY 276 Royce City, Texas 75189 Phone (972)289-1700 email: stevenv@decorativeconstructionsupply.com
We ship! Now shipping to: Texas, Louisiana, Mississippi, California, Oklahoma, Georgia, Florida, New Mexico, Arkansas, Arizona, Dallas, Nevada, Mesquite, Garland, Waco, Rockwall, Irving, Denton, Arlington, Allen, Mckinney, Richardson, Houston, Austin, Carrollton, Grapevine, Fort Worth, Lubbock, San Antonio, Frisco, El Paso, College Station, Galveston,
San Marcus, Shreveport, New Orleans, Bossier City, Norman, Odessa... etc.
We ship! Now shipping to: Texas, Louisiana, Mississippi, California, Oklahoma, Georgia, Florida, New Mexico, Arkansas, Arizona, Dallas, Nevada, Mesquite, Garland, Waco, Rockwall, Irving, Denton, Arlington, Allen, Mckinney, Richardson, Houston, Austin, Carrollton, Grapevine, Fort Worth, Lubbock, San Antonio, Frisco, El Paso, College Station, Galveston,
San Marcus, Shreveport, New Orleans, Bossier City, Norman, Odessa... etc.
