Xtreme PreCast Mix is a hybrid GFRC, dual component, pourable precast concrete bag mix. An excellent choice for concrete countertops, fireplaces, wall panels and other designs. The high early strength and 6-12 hour cure time allows fo fast production and turnaround. 

7039 HWY 276 Royce City, Texas 75189 Phone (972)289-1700 email: stevenv@decorativeconstructionsupply.com

A perfect medium for residential, commercial and industrial applications. Xtreme 
PreCast versatility allows for the fabrication of precast concrete countertops, fireplaces, shower surrounds, wall panels, furniture and architectural element.

Xtreme PreCast combines the most advanced chemical technology with modern 
fiber advancements, to create an unparalleled precast concrete mix design.  This 
technology binds the raw materials of cement and sand with other proprietary ingredients into a stronger, denser and more flexible cementitious composite not requiring the use of steel.

•  Add 2 —color packs (if desired) to 1—gal. Xtreme PreCast Modifier and mix 
thoroughly. (Note to shake or mechanically mix modifier) 
•  Introduce 1—bag Xtreme PreCast while mechanically mixing thoroughly for 
approximately 5 min’s. After all ingredients are combined, mix should approximate the consistency of a loose milkshake. 
•  The addition of up to 16 oz of water per bag of Xtreme PreCast will help make 
the mix more consolidating.

Pour mixed material into form. While high frequency vibration is not absolutely required, it will help material to fill the form level, enhance readability, and reduce pin holes that may have been created by air. Decorative aggregate loading - Xtreme PreCast’s mix design can accept up to 10 lb’s or 20% per bag of aggregate sizes 0 or greater. Alternatively, aggregate or other decorative elements may be added or seeded into the base of the form prior to placing the mix. In approximately (4) hours the countertop may be pulled from the form. In most cases after 8 hours, the countertop may be tooled. Any pinholes may be filled with a slurry mix created through wet polishing and LD1800 (Lithium Densifier) or a slurry of Xtreme Series Slurry Coat combined with custom coloring with a Color Pack.  Secondary coloring can be achieved through SureCrete’s acid stains, waterbased 
stains or dyes if desired. Final sealing selection is dependent upon the finish desired. Densifiers, waterbased sealers, Polyurethanes and Epoxy's are acceptable finishes for concrete tops. Advancements in sealers and techniques are continuously changing, for the latest information please contact a SureCrete Representative. 

7039 HWY 276 Royce City, Texas 75189 Phone (972)289-1700 email: stevenv@decorativeconstructionsupply.com
We ship! Now shipping to: Texas, Louisiana, Mississippi, California, Oklahoma, Georgia, Florida, New Mexico, Arkansas, Arizona, Dallas, Nevada, Mesquite, Garland, Waco, Rockwall, Irving, Denton, Arlington, Allen, Mckinney, Richardson, Houston, Austin, Carrollton, Grapevine, Fort Worth, Lubbock, San Antonio, Frisco, El Paso, College Station, Galveston, 
San Marcus, Shreveport, New Orleans, Bossier City, Norman, Odessa... etc.